Textured coatings, also known as stippled ceilings, Artex, popcorn ceiling, decorative coatings were very popular in the 70's and 80's. They usually contain between 3-5% Chrysotile asbestos. Typically, the textured coatings are well encapsulated with years of paint. The risk of fibre release is low but may occur when subject to abrasion.

Typically found behind old fuseboards or on garage ceilings, Asbestos Insulating Board or AIB usually contains between 16-40% Amosite asbestos. Aas this is a semi-compressed board it is more likely to release fibres as a result of damage or abrasion. Work on AIB can give rise to high levels of asbestos fibre release.
​

Asbestos Cement Products may include slates, corrugated sheeting, gutters, downpipes, flues and cowls. They generally contain 10-15% asbestos bound in cement. The asbestos fibres are usually firmly bound within the cement matrix but can be released through mechanical damage or deterioration from weathering over many years.
​  

A survey, carried out by a qualified asbestos surveyor, is the only way to be sure if there are Asbestos Containing Materials in your house. The surveyor will take samples of suspected materials which will later be analysed in a laboratory. They will also carry out a risk assessment on any Asbestos Containing Materials found and give advise on whether they can be managed in situ or should be removed.

If you would like further information on they types of survey that we conduct, or if you have any questions about asbestos please get in contact with us.

There has been a lot of talk around the world lately about the dangers of Silica dust. So much so, the Health & Safety Authority have started to make a lot of noise about it too - and rightly so. I have been speaking to colleagues in the States who have told me that OSHA have really cracked down on the control of Silica dust and they believe that the industry evolving around the control of Silica dust will be bigger than the Asbestos industry.

So, what is Silica dust?
Silica is one of the most common naturally occurring elements on the planet. Silica, the mineral compound silicon dioxide (SiO2), is found in two forms -- crystalline or noncrystalline (also referred to as amorphous). Sand and quartz are common examples of crystalline silica. Many common construction materials contain silica including, for example, asphalt, brick, cement, concrete, drywall, grout, mortar, stone, sand, and tile.

What are the dangers?​
Inhalation is the primary route of exposure to crystalline silica dust. For any kind of dust, there are different particle sizes. When dust is inhaled, its point of deposition within the respiratory system is very much dependent upon the range of particle sizes present in the dust. It is the respirable (smallest particle size) fraction of crystalline silica dust which is of critical concern for its health effects, since these can penetrate deep into the lung.
Inhalation of fine dust containing crystalline silica can cause lung damage (silicosis), which in severe cases can be disabling, or even fatal. Silicosis is irreversible and treatment options are limited. Workers may develop any of three types of silicosis, depending on the concentration of airborne silica:
• Chronic silicosis, which usually occurs after ten or more years of exposure to crystalline silica at relatively low concentrations.
• Accelerated silicosis, which results from exposure to high concentrations of crystalline silica and develops five to ten years after the initial exposure.
• Acute silicosis, which occurs where exposure concentrations are the highest and can cause symptoms to develop within a few weeks to four or five years after the initial exposure. Workers exposed to RCS are at increased risk of developing lung cancer.

Similar to Asbestos, Silica dust can be transferred on clothing. The National Institute for Occupational Safety and Health (NIOSH) recommends that workers avoid bringing silica dust home from work by:

• Changing into disposable or washable work clothes at the worksite.
• Showering (if possible) and changing into clean clothes before leaving the worksite to prevent contamination of other work areas, cars, and homes.
• Parking your car where it will not be contaminated with silica.

How do we protect our workers?
• The first step to controlling crystalline silica is to carry out a Risk Assessment.
• Seek to substitute the silica containing material with a suitable alternative if possible.
• Use safe systems of work such as wet methods for dust removal/suppression.
• Engineering controls such as Local Exhaust Ventilation (LEV) or containment measures should be used where appropriate.
• Wear suitable PPE such as coveralls and appropriate gloves.
• Respiratory Protective Equipment (RPE) should either be a FFP3 disposable respirator or a P3 particulate filter fitted to a half or full face mask to provide effective protection and be CE marked. All RPE should fit the employee correctly.
​• Any RPE worn should be properly fit tested.
​
​What are the legal requirements?
The respirable fraction of the dust is invisibly fine and the OELV for Respirable Crystalline Silica (RCS) is 0.1mg/m3 averaged over 8 hours, as set down in the HSA Chemical Agents Code of Practice under the Safety, Health and Welfare at Work (Chemical Agents) Regulations 2001. A risk assessment under these regulations is required where exposures to RCS can occur.
The Safety, Health And Welfare At Work (General Application) (Amendment) Regulations 2016 S.I. No. 36 of 2016 contains a  Prohibition on silica – Regulation 128 “An employer shall ensure that no sand or other substance containing free silica is introduced as an abrasive into any blasting apparatus.

​Further information can be found on the Health & Safety Authority website and also the Health & Safety Executive website in the UK.

We are very excited to announce that Envirotrade are now distributors in Ireland for the Stealth range of personal safety respirators and filters. The unique design of these half mask respirators accompanied with the exclusive HEPAC (High Efficiency Particulate Air Composite) media pleated filters are set to shake up the RPE market.
​
There are currently two types of filters available for the masks:

• ​Stealth HEPAC P3 (R) - particulate filter
• ​Stealth HEPAC P3 (R) N - carbon nuisance odour particulate filter

​
​Each mask comes fitted with a set of filters (P3 (R) or PR (R) N)
​The respirators are available in two sizes - S/M or M/L

The Stealth P3 (R) Personal Safety Respirator is a reusable half mask which provides complete respiratory protection against solid dust particles, metal fumes and liquid mists. With the respirator designed to meet the requirements of EN140 and the replacement filters to EN143, the Stealth P3 (R) Personal Safety Respirator provides and Assigned Protection Factor (APF) of 20.
The Stealth P3 (R) Personal Safety Respirator offers comfort, ease of adjustment, high
performance and a refined unobtrusive design. Using the exclusive HEPAC (High Efficiency Particulate Air Composite) Media within the construction of the pleated P3R filters, the favourable characteristics of both synthetic and glass filtration medias are combined to provide bacterial and viral filtration performance at low pressures. Typical applications include:

• ​Home DIY
• ​Metal Working (welding and grinding)
• Construction/Quarrying
  
• Ceramics/refractory materials
  
• Agriculture
  
• Wood working
  
• Glass fibre insulation
  
• Stone masonry
  
• Asbestos removal
  
• Pharmaceutical
  

Some of the features and benefits are:

• ​Low profile design maximises field of vision. Fits under most welding helmets and safety visors.
• Ergonomic design - extremely low breathing resistance makes the Stealth mask suitable for most work activities ranging from low to strenuous, and short to extended periods.
• Manufactured from high grade materials which are odour free, non-allergenic (the TPE mask body material is latex and silicone free).
• Single piece head and neck strap runs with ease through four anchor points optimally positioned on the grill whilst the strap is easily tensioned by simply pulling the strap ends through the self-locking neck clips providing a customised user face fit.
• Exclusive HEPAC (High Efficiency Particulate Air Composite) media pleated filter design provides additional surface area for maximum efficiency and filter life, providing optimal efficiency in both humid and non-humid environments. The Stealth HEPAC P3 (R) filters provide 99.95+% filtration of airborne particles and oil aerosols at 0.3 microns and above.
• Protective grill with sleek downward facing louvres protecting the filter from debris and dust in harsher environments and is easily removed for filter replacement.
• Large non-return exhaust valve eases breathing and reduces user fatigue, positioned to exhale downwards avoiding condensation of visors and eye protection.
• Sample port - the only known respirator on the market with integral sample port & plug to allow non-destructive quantitative face fit testing of each unit.

The Stealth range of respiratory protection can be purchased directly from our online store or by contacting Neal on 083 1066404 or neal@envirotrade.ie

We recently employed the services of Dan Devlin over at Vanguard Design to create a graphic that showed our product range. In the brief, we requested that it should be informative but simple and jargon free. We think Dan got it spot on and we are delighted with his work.
Anyway, enough of a plug for Dan. Here is what our product range includes:
Head Protection
Respiratory Protection
Jackets & Torso Protection
Gloves & Hand Protection
Trousers & Leg Protection
Foot Protection
​Our product range is growing daily and not all products are on our website. If you would like more information about any of our products or would like to see a sample please contact us through any of the following:
Contact Page
info@envirotrade.ie
​083-1066404

We understand how important your brand is to you. If you are like us, you have spent years promoting your brand to develop a stronger image in your marketplace.
What better way to promote your brand than to proudly wear it on your chest? We can now offer a professional embroidery service to put your logo on workwear. We have stylish soft shell jackets, hi-vis clothing, hard wearing polo shirts and sweatshirts.
We do not have a minimum order quantity. There is a €30.00 setup cost to have your logo digitised. All we need is a jpeg of your logo.
If you would like more information or a quotation email info@envirotrade.ie or call Neal on 083-1066404.

Are you tired of wearing cardboard workwear?
​If you need the performance but don't want to compromise on comfort you should try out our new range of Trojan Workwear. We stock a full range of workwear from boots and trousers to polos and jackets. Our workwear is tough and comfortable, and won't make you feel like the Michelin Man!
​Our tradesman trousers have more pockets than a snooker table and are as tough as old boots!
​The Trojan Trail Soft Shell Jacket will keep you warm and allows you to move freely.
​If you want to be super hot put a hoodie under your soft shell jacket.
​Our Action Lined Trousers will keep you as snug as a bug in a rug on the cold winter mornings!
​So, ditch the traditional poker stiff trousers and jackets and try our Trojan Workwear.

We are excited to announce that we are now selling premium wood pellets. We have launched a brand new website just for our wood pellets - www.buywoodpellets.ie
Our wood pellets have been produced using 100% coniferous wood with no additives. The wood is sourced from sustainable forests in Latvia. Some of the advantages of using our pellets are:

• Easy to ignite
  
• High calorific value (burn for longer)
  
• Clean burning
  
• Low moisture content
  
• Dust free
  
• Low ash content

​They are available in 1000kg bags or 15kg bags, and can be ordered directly from the website for delivery throughout Ireland.

#foracosyhome​